Medical Cart + Point of Care
Medical carts and devices used at the point of care need to be quickly accessed and intuitively used when called-on. When idle, this imperative medical equipment may also need to be secured or provide limited access. ILC has the solutions to solve these specific medical application challenges.
Standard Tubular Cam Lock
Specifications
Economical Die Cast Cam locks for everyday use.
Various cams, rotations, key pulls and finishes.
Available keyed alike or keyed different in multiple lengths.
7 Pin Tumbler - Round Tubular Key Mechanism.
Over 750,000 Key Changes.
Master Keying available with 3,000 piece minimum order.
DC510 Series
Material and Finish
Housing: Zinc Alloy.
Finish: Bright Chrome US26 (Standard).
Brass (BC510) with 012A Chrome Finish optional.
Satin Nickel US15, Black E-coat optional.
Specifications
Get Sample
Customize
Heavy Duty Drawer Slides Hardware Mounted
Specifications
Dynamic load rating for 18" slide - 255 lbs.
Screw pattern mounting pattern for secure installation.
Hi-Lo temperature grease lubricant.
Operation temperature range between -40°F (-4°C) to 130°F (55°C).
Excellent quality with competitive pricing.
Locking tabs and bumpers are standard.
Material and Finish
Material: Cold Rolled Steel.
Finish: Electro-zinc plating (Standard).
Black electro-zinc plating and black electro-dip (Optional).
Specifications
Get Sample
Customize
I-LOCK Electronic Cam Lock - 10 Button
Specifications
10 button electronic lock.
Simple touch screen entry.
1 to 15 digit user defined code.
Clutch Knob.
Two Versions.
Standard use - Enter a user code and it remains until reset.
One time use - Enter code to lock and unlock only once.
Button cell battery with up to one year life (CR2032).
Optional battery pack.
Audible alarm when incorrect code is entered 4 times.
Low power alarm - Audible signal sounds when 300 cycles remain.
E902 Series
Material and Finish
Housing: Zinc Diecast and Silver Powder Coat.
Silver Powder Coat.
Specifications
Get Sample
Customize
Duo High Security Cam Lock
Specifications
Pick resistant lock.
Stainless steel guides to deter drilling.
14 tumbler triple bitted keyway.
Positive tumbler operation provides for mechanical movements of the tumblers without the aid of springs. The feature reduces failures caused by dirt, corrosion or freezing.
14,000 primary keys available, 200 master keys, 30 grand master keys.
Stainless steel ring between plug and barrel for pull resistance.
Triple bitted keys with side serratures controlling secondary tumblers not duplicable on standard machines.
SD6416 Series
Material and Finish
Housing: Zinc Alloy.
Finish: Bright Chrome US26 (Standard).
Satin Nickel US15 or Black E-Coat (Optional).
Specifications
Get Sample
Customize
Custom Position Control
This is a customizable product. If you are interested, please click the Request or Customization buttons below to fill out a form.
Get Sample
Customize
2 Inch Position Control Hinge
Specifications:
Constant torque and smooth rotation for the following applications: Vehicular, Aerospace, Seating Medical, Electronics, Kiosks
Large size hinge, increased haptics
Long cycle life, zero maintenance
Zinc alloy material with black paint finish
20,000+ cycles (+/- 20% of static torque value)
270° rotation
Maximum radial load of 155 N (35lbf)
Maximum axial load of 155 N (35lbf)
Get Sample
Customize